A2 PEI Process Controller

A2 PEI Process Controller

For use with ESAB power sources and motors.


  • Control system for A2 tractors and A2 welding heads
  • Analog type that can control most brands of power supplies
  • Suitable for submerged arc welding (SAW) or gas metal arc welding (GMAW)
  • Travel speed, voltage and wire feed speed can be adjusted by simply turning the knobs — actual data is shown on digital displays during welding
  • Change welding direction using switch on front panel
  • Choice of scratch start or direct start methods
  • Adjustable burn-back time


Power Requirements and Connections

Burnback 0-2.0 sec
Connection Power max 700 VA
Connection Type to Power Source Burndy contact, 23 poles
Connection Voltage from Power Source 42V AC 50/60 Hz
Enclosure Class IP23
External Current Shunt 1000A/60mV, 1500A/60mV, 600A/100mV, 750A/100mV
Flow Guard NO Contact / PNP OC
Limit Switches NO Contact / PNP OC
Motor Connection Adjustment, A2 42V DC, 3.5A P 100%, 4.5A P 60%
Post-Gas Flow Time 1.0 sec
Pre-Gas Flow Time 0.5 sec
Standards EN50199, EN60974-1
Welding Voltage Control 0-10 VDC

Speeds and Temperatures

Max Transport Speed 2.0 m/min (79 in./min)
Operating Temp -10 to 40 °C (14-104 °F)
Welding Speed 0.1-2.0 m/min (4-79 in./min)
Wire Feed Speed 0.5-16.2 m/min (20-640 in./min)

Weights and Dimensions

Height 8.7 in. (220 mm)
Length 7.8 in. (197 mm)
Weight 14 lb (6.2 kg)
Width 9.0 in. (227 mm)


Отзывов пока нет.

Только зарегистрированные клиенты, купившие этот товар, могут публиковать отзывы.